Main technical parameters:

• Input voltage: DC 12V (±30%)
• Operating current: ＜ 1000mA;
• Card Reader Type MF1 Card
• Standard Voltage DC 12V (±30%)
• Operating current ＜ 1000mA;
• Card Reader Type MF1 Card
• User Capacity     Offline card issuance is unlimited; online card issuance is available. 30,000 copies
• Number of Blacklisted Items 15,000 sheets
• Card transaction records 56,000 entries
• Motherboard Floor     Single relay 32 layers, with dual relays on 16 layers (up to 64 layers controllable with an expansion board)
• Expansion board floor   Single relay 32nd floor, dual relay system on the 16th floor
• System Equipment 255 units
• Floor Detection Route 2
• Fire Protection Interlock Route 1
• Wigan Read Head Route 1
• 485 Read Head, Channel 1
• Computer Communication RS485+TCP/IP
• Output load 2A 12VDC (Dry Node Signal)
• Operating Temperature     -20℃ to 70℃
• PCB Dimensions: Mainboard – 201mm long x 100mm wide; Expansion Board – 145mm long x 72mm wide
• External dimensions     Motherboard: Long 200mm x width 116mm x height 19mm; Expansion board: length 145mm x width 90mm x height 19mm
• Case form factor     Long 285mm x width 230mm x height 76mm
• Installation location: On the inner wall of the control panel base box or at the top of the elevator car (if installed at the top, a car body extension must be added).

Product Features:

• Card issuance via offline management software, eliminating the need for on-device card issuance operations. , you can choose to issue cards online.
• Available to receive W26/W34/485 read head, supporting card-swiping readers, fingerprint recognition, facial recognition, and other devices.
• Motherboard Dual Relay Control 16 floors, configured with a single relay; for 32 floors, an expansion board can enable control of up to 64 floors.
• Use both single-floor swipe-to-direct access and multi-floor swipe-button options within the same elevator.
• Automatically restores control in case of fire hazards , do not use the elevator without swiping your card.
• Scheduled floor openings , You can set up three time periods each day to use the elevator without swiping your card.
• Card-swiping relay delay 1–255 seconds, with coordinated delay ranging from 1 to 50,000 seconds.
• Power Outage Recovery Control , you can also use the management card to enable and disable the motherboard's control.
• Support building intercom and visitor integration , After residents unlock the door, visitors can use the elevator to reach the corresponding floor.
• Capable of detecting the basement level and second basement level , After linkage, the elevator automatically goes to the visitor floor.
• Supports ID-based visitor registration, smart card issuance, and access control with elevator management systems. .
• Card validity period can be set. /Number of times/Timing restrictions/Unlimited card; lost cards can be reported as stolen and replaced.
• Offline card issuance method: Card capacity is unlimited. , Online card issuance capacity is 40,000 cards, with 15,000 offline records.
• Cards and readers set their own passwords. , One card, one password—eliminating the risk of user card duplication
• There are both flush-mounted and surface-mounted aluminum alloy readers, as well as conventional card readers with plastic housings.
• It can connect to a voice module to announce the card-swiping status. , Card expiration reminder in advance.
• Features a color touchscreen password reader , Swiping displays name/transaction count/expiration date; motherboard parameters can be set on the reader head.
• There is TCP/IP and 485 network interfaces allow for remotely activating any floor via software.
• The network allows setting controller parameters. , which can monitor card-swiping information in real time.
• The floor interface uses relay switch signals to control the floor buttons. , without affecting the elevator's performance.
• With Building Access Control /Single-door/Two-door/Four-door controller—managed by a single software.
• Support ACCESS or SQL database, supporting client software.

Install a facial recognition gateway, an elevator control controller, and a card reader inside the floor-selection button panel of each elevator, working in conjunction with the digital camera installed in the elevator car. (If no digital camera is currently available, it will need to be reinstalled—and similarly… Plain 1080 P, Having Day Night Switch modes, Digital width Dynamic, Lens Use 6 mm Or 8 mm ) After performing facial recognition and successful authentication, the elevator automatically activates the floor numbers within the user's authorized range, eliminating the need for users to repeatedly press buttons to select their destination. Buttons for floors outside the user’s authorized range become inactive. This indoor call-control elevator management method not only keeps overall investment costs low but also offers dual functionality—single-ride billing and access control. Additionally, residents can use the call button on their in-room extension to summon the elevator directly to their floor, removing the need to leave home just to press the elevator button.

• Xiwowo Technology's facial recognition elevator control system requires no special triggers—it automatically captures and identifies faces.
• Xiwowo Technology's facial recognition elevator control system requires no installation. APP, or any auxiliary client tool, allows customers to simply enter portrait information;
• Xiwowo Technology's facial recognition elevator control system is simple and straightforward—we exist solely to open doors.
• Xiwowo Technology's facial recognition elevator control system can utilize the existing digital cameras inside elevators, helping to reduce costs.